FLYCUT TOOL FOR VW INSTALL
FLYCUT TOOL FOR VW PLUS

Plug Size: 14mm (Replacement Bosch Number is W8CC or NGK is B5ES) Valves: 42mm Intake by 36mm Exhaust (Stainless 8mm Valve Stems) Sold as each quantity two (2) required per engine. These cylinder heads accept standard 94mm or 96mm cylinders but can be opened to accept 100-105mm machine-in big bore cylinders (call for details). Heads feature hardened keepers, chromoly retainers, and single high rev valve springs. Made by AA Performance Products, these 100% new 2.0L 914 cylinder head castings come fitted with provision for breather and include stainless steel 42mm intake and stainless steel 36mm exhaust valves.

FLYCUT TOOL FOR VW INSTALL

This is a brand new, ready to install replacement VW Type 4 cylinder head for Porsche 914 and 912E 2.0L models. Require the compression ratio to be lowered by increased the deck height to You should not exceed compression ratios listedĪbove at 1mm deck for 93 or 94 octane fuels areas with 90 or 91 octane will Pump premium unleaded fuels are required forĪll Type 4 Store engine kits. Quality, altitude, whether you are using carburetors or fuel injection, timing, Will will vary depending on application, what camshaft profile is used, fuel NOTE: These are calculated compression ratios and not specific The calculated compression ratios listed below are based off our Nickies cylinders and JE Pistons: Our shelf 102mm JE Pistons for the 71mm stroke are flat top and for 78mm+ strokes have aĤ.1cc total dish volume including valve reliefs. Our Mountain Climber 100mm pistons have a 8.9cc dish including valve reliefs. Needs to be specified when ordering your cylinder heads as this is special

LE200 cylinder heads to be fly-cut deeper to reduce chambers to 57cc’s. To achieve a 9.0:1Ĭompression ratio on a 2056 with 1mm of deck height will require the RS+ or

FLYCUT TOOL FOR VW PLUS

Our Camper Special Plus 96mm pistons have a 13.5cc dishĪnd our shelf 96mm pistons for both 71mm and 78mm+ strokes both feature flat tops with no valve reliefs. Special pistons have a 10.9cc dish, and the 94.5mm Camper Special Our shelf 94mm pistons are flat tops with no valve reliefs, 94mm Camper Your original German 93 or 94mm cylinders to be bored out and honed to 94.50mm. Unless otherwise specified, all combinations are designed for use with NickiesĬylinders other than the 94.5mm CS Camper Special JE Piston set that requires LE200 Cylinder Heads (based on new AA castings) have 59-60cc chamber volumes and can be special ordered with a deeper flycut to reduce chamber volumes to 57cc To be 0.5mm in the hole (down from the top of the cylinder in the bore). Total deck measurement meaning for a total 1mm deck, you would want the piston 5mm stepcut you would include the depth of the 0.5mm stepcut in the The Type 4 Store CS Camper Special heads (based on new AMC Bus castings) have 49-50cc chambersĪnd have a. Optional premium dual Crower springs and retainers allow for long life even at elevated revs.Ĭamper Special, RS+, and LE200 Chamber Volumes and Compression Ratios All coatings are done by the industry leader, Calico Coatings, and really work! We are also incorporating cryogenically treated and REM superfinished valve springs for added spring life. RS+ and LE200 Heads also feature an optional thermal dispersant coated exterior. The ceramic coatings applied to the exhaust ports can handle sustained 1400F+ temperatures and are proven on track. In 2019 we added thermal barrier coated chambers and exhaust ports based which based on our research help to improve valve sealing and extend valve job life by reducing how much heat goes into the heads from combustion and exhaust heat. While many products for engines are developed, brought to market and never further developed, that is not the case with the RS+. Our cylinder heads are not available anywhere else and all Aircooled Technology engines feature the same cylinder heads sold by the Type 4 Store. Along with quality Serdi valve jobs and the highest quality components and machining, you will not find better heads for your Type 4 engine anywhere else.

We are continuing that legacy with improvements including thermal barrier coated chambers and exhaust ports, as well as thermal dispersant coatings on the exterior of the cylinder heads. TYPE 4 STORE CYLINDER HEADS FOR VW TYPE 2/4 AND PORSCHE 912E/914 ENGINESĪll Type 4 Store cylinder heads are the culmination of decades of research and development at Aircooled Technology and are based off 100% new castings. RND RS Cylindrical Roller IMS Bearing Replacement Retrofit Kit.Camper Special and Mountain Climber kits.DRIVEN® Greases, Fluids and Car Care Products.

DRIVEN® Transmission / Gear Fluids and Oils.Identifying & Fixing the Porsche IMS Bearing Problem.Nickel Silicon Carbide (NSC) Cylinder Plating.Replacement Mahle OEM Porsche Cylinders.Mahle Motorsport Porsche Pistons & Nickies Cylinders.

Flycut tool for vw